close
close

How To Install Door Hinges On A Cabinet

How To Install Door Hinges On A Cabinet. Some hinges are all one piece and can’t be taken apart. Remove all the hinges already present on the door by unscrewing them off.

How To Install Concealed Door Hinges YouTube from www.youtube.com

Using a drill bit, a hole the same width as the barrel hinge needs to be drilled into the edge of the cabinet door, and a matching hole drilled into the cabinet frame. Lay the cabinet door down on a flat surface, with the back facing up. How to install cabinet door hinges.

There's A Good Reason For This.

Use screws to attach the hinges to the back of the door. They say a picture is worth a thousand words, so a video about how to install hinges and hang your cabinet doors must be worth a million. Using a drill bit, a hole the same width as the barrel hinge needs to be drilled into the edge of the cabinet door, and a matching hole drilled into the cabinet frame.

Lay The Cabinet Door Down On A Flat Surface, With The Back Facing Up.

First, attach the hinges to the door while laying flat, then align it with the frame. Fill the old screw holes with dowels or toothpicks glued inside the hole. Cabinet door installation instructional video.

To Do This, Simply Unscrew The Existing Hinges And Lift The Door Off The Cabinet.

Using the rest of the screws included with the hinge, install the door to the cabinet getting it as close as possible to its correct vertical location. Remove all the hinges already present on the door by unscrewing them off. If you’re unclear about any of these steps, refer to this video of how to mount hinges, hang your doors, and align them like a pro.

So Basically, (For Example) If Your Door Is ½” Overlay, Screw It Onto The Cabinet As Close As Possible To The Door Being ½” Above And ½” Below The Inside Of The Face Frame.

Screw the hinges onto the door, then attach the other side of the hinges to the cabinet by screwing them in place. Remove any existing hinges from the cabinets and lift off the doors. The barrel hinges then slot into place and are connected by an arm that allows the cabinet to open and close.

Traditional Cabinet Doors Aren't Designed To Fit Inside The Cabinet Face, And Simply Using An Inset Hinge Will Not Work.

You can convert the existing doors by cutting and shaving them if you are willing to put the work into it. Be sure to choose hinges strong enough to support the weight of your cabinet door. Now attach your new kitchen cabinet hinge with a few screws, and screw the hinge back to the frame of the cabinets.

Leave a Comment